|
Property
|
WANOL F3150A
|
Test Method
|
Appearance
|
Clear liquid
|
Q/0600 YPU 038
|
|---|---|---|
|
Color, APHA
|
≤50
|
GB/T 605
|
|
Viscosity (25℃), mPa·s
|
1000~1500
|
GB/T 12008.7
|
|
Water content, %
|
≤0.05
|
GB/T 22313
|
|
K+ , ppm
|
≤7
|
GB/T 12008.4
|
|
PH
|
5~7
|
GB/T 12008.2
|
|
OHV, mg KOH/g
|
32~36
|
GB/T 12008.3
|
WANOL F3150A is a highly active polyether polyol with trifunctional strength. WANOL F3150A suitable for polyurethane ultra-soft foam, absorbent foam, viscoelastic foam, etc.
Iron drums, IBC tanks, tank wagons and other suitable packages, if necessary
This product should be stored in an inclosed container produced with steel, aluminu m, PE or PP, and nitrogen is suggested to fill in the containers. When WANOL F3150A is stored, moist and wet conditions should be avoided, the temperature of the environment should be maintained below 50 ℃, and avoid sunlight, water and heating. Above 60 ℃, a deterioration of the product quality would be caused. Short term warming or cooling of the product to low temperatures does not damage the product. It should however be noted that at low temperatures viscosity increases markedly and this may cause difficulties in processing.
Under recommended storage conditions, the shelf life of WANOL F3150A is 12 months since the date of production
Most polyols generally present no significant hazard in use when simple precautions are Ltdfollowed. No special ventilation is recommended under anticipate conditions of normal use beyond that needed for normal comfort control. Eye protection such as chemical splash goggles and/or face shield must be worn when possibility exists for eye contact due to splashing or spraying liquid, airborne particles, or vapor. Contact lenses must not be worn. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Not normally considered a skin hazard. Wash hands and other exposed areas with mild soap and water before eating, drinking, smoking and when leaving work.
Stop leak if you can do it without risk. For small spills, take up with sand or other absorbent material and place into clean, dry containers for later disposal. Large spill should be collected for disposal and then be cleaned by the rag with lye or acetone, prevent flow to sewer/public waters. Keep unnecessary people away, isolate hazard area and deny entry. All of the collected waste material should be handled according to the regulation of the local environment agency.
Release date: Jul. 28 th , 2023, version number : V1.0
Revision date：Jun. 14 th ,2024, version number : V2.0
Address: Wanhua Chemical （Penglai） Co., Ltd.
No, 5, Fengtaishan Road, Beigou Town, PengLai, Yantai, Shandong Province, Chin
aCustomer service number: :+86 400 9600309
E-mail: polyol@whchem.com
Web-site: http://www.whchem.com
The information provided here is for reference only. The specification will be provided in the quality certificate or in the contract. It is the user’s responsibility to test the material and its suitability for a process. We have no control over what another party does with the material and we cannot take any responsibility for another party’s action. Nor will we be responsible for any indirect damages while using our products. The user is welcome to contact our customer and technical service center with questions on our products.