|
Property
|
WANOL C2010D
|
Standard
|
|---|---|---|
|
Appearance
|
Clear liquid
|
Q/0600 YPU 025
|
|
Color, APHA
|
≤50
|
GB/T 605
|
|
Viscosity (25℃), mPa·s
|
100～200
|
GB/T 12008.7
|
|
Water content, %
|
≤0.03
|
GB/T 22313
|
|
Density(20℃), g/cm3
|
0.9～1.1
|
GB/T 4472
|
|
K+, ppm
|
≤3
|
GB/T 12008.4
|
|
PH
|
5～7.5
|
GB/T 12008.2
|
|
OHV, mg KOH/g
|
108.5～115.5
|
GB/T 12008.3
|
WANOL C2010D is a two functional polyether polyol. It is suitable to produce PU elastomers , especially for CASE and many other applications.
The actual packaging form shall be subject to the results of communication between the supply and demand parties
WANOL C2010D should be kept in properly sealed, moisture-tight containers and stored indoors at ambient temperature (15-35℃) in a dry and well-ventilated area. Storage at low temperature (below5℃) may lead to viscosity increases markedly, and this may cause difficulties in processing. Extended storage at temperatures above 60 ℃ is not recommended to prevent from deterioration of the product quality
Under recommended storage conditions, the shelf life of WANOL C2010D is 12 months since the date of production.
Most polyols generally present no significant hazard in use when simple precautions are followed. No special ventilation is recommended under anticipate conditions of normal use beyond that needed for normal comfort control. Eye protection such as chemical splash goggles and/or face shield must be worn when possibility exists for eye contact due to splashing or spraying liquid, airborne particles, or vapor. Contact lenses must not be worn. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Not normally considered a skin hazard. Wash hands and other exposed areas with mild soap and water before eating, drinking, smoking and when leaving work.
Stop leak if you can do it without risk. For small spills, take up with sand or other absorbent material and place into clean, dry containers for later disposal. Large spill should be collected for disposal and then be cleaned by the rag with lye or acetone, prevent flow to sewer/public waters. Keep unnecessary people away, isolate hazard area and deny entry. All of the collected waste material should be handled according to the regulation of the local environment agency
Release date: Apr. 30th, 2024, version number :V7.0.
WANHUA CHEMICAL (YANTAI) RONGWEI POLYURETHANE CO., LTD
Address: No. 59, Chongqing Street, YEDA, Yantai, 264006, China
Customer service number: +86 400 9600309
E-mail: polyol@whchem.com
Web-site: http://www.whchem.com
The information provided here is for reference only. The specification will be provided in the quality certificate or in the contract. It is the user’s responsibility to test the material and its suitability for a process. We have no control over what another party does with the material and we cannot take any responsibility for another party’s action. Nor will we be responsible for any indirect damages while using our products. The user is welcome to contact our customer and technical service center with questions on our products.